Laptop Plugged in But Not Charging: 4 Easy Solutions That Works
A laptop
is very convenient to use anywhere as it comes with a battery and when it runs
out of power, you just need to charge it to continue using it normally.
However, users often report certain charging issues such as, ‘No battery
detected’, ‘laptop plugged in but not charging’. On your laptop screen, you
might even notice that though the charging light is on yet your device is not
charging, and it might show you the frozen battery at 0% or any other digit.
This
problem could be caused due to a default charger, issues with the hardware and
the firmware, overheating of the laptop, Windows settings, corrupt or outdated
drivers, etc.
So if you
have plugged in, but the battery refuses to charge your laptop, then you should refer
to this entire article to get your a few solutions for this problem.
You have
to do this if your laptop refuses to charge your battery even if it knows that
it is plugged in:
Also
available on TechSunk: Laptop Screen Issues? Useful Quick Fixes
Available
Solution 1: Uninstall-Reinstall the
Microsoft AC adapter
Before
reinstalling the laptop battery driver, you should shut down your laptop,
remove the battery and then start your laptop again.
Please
Note: If
the battery is not installed on your laptop, you should uninstall it first, and
then update both the ‘Microsoft AC Adapter’ and ‘[Fixed]
Microsoft ACPI-Compliant Control Method Battery’. Also, if your laptop battery
is in good condition, then it might be the corrupted power management driver
that causes the ‘plugged in but not charging’ issue. For this purpose, you need
to uninstall the power adapter driver in the device manager and then reinstall
it again on your device.
Step
1: At first,
you need to go to the ‘Device Manager’.
Step
2: Then you
need to expand the ‘Battery’ and right-click on the ‘Microsoft ACPI-Compliant
Control Method Battery’ option to uninstall it.
Step 3: After that, you need to
confirm the ‘Uninstall all the Battery drivers’ option from your operating
system.
Step 4: In Device Manager, you need to
find the ‘Action’ menu and click on it.
Step 5: Now, you need to choose the
option of ‘Scan’ for changes in the hardware.
Step 6: Once done, you need to restart
your laptop.
After
following all these steps, there are high chances that the Device
Manager will install the ‘updated Microsoft AC Adapter’ for
your operating system after scanning for the hardware changes.
Once you
get the latest drivers for your operating system, you need to shut down your
laptop again and then insert the removed battery back into its place. In the
end, you will have to start your laptop again and you will be good to go.
You may
also check: Easy Ways To Change Screen Resolution In Windows
10
Solution 2: Check the power settings
In Windows
10 operating system, there is a setting related to the battery settings which
you will find in ‘Power settings’. If your operating service is Windows 10 and
due to some issue, your laptop won’t charge, then you can check whether or not
you have banned the charging function for your Windows 10 laptop.
Step 1: First, you will need to go to
the ‘Start menu’.
Step
2: From the
Start menu, you need to head towards the ‘Settings’.
Step 3: There, you need to find the
option of ‘System’.
Step 4: In the ‘System menu’, under
the option of ‘Power & sleep’, you will find an option of ‘Additional power
settings’. Click on it.
Step 5: Then, you have to choose the
option of ‘Change plan settings’ beside the ‘Power Plan’, after which it will
get Balanced.
Step 6: Next, you would need to choose
the option of ‘Change advanced power settings’.
Step 7: Then in the ‘Power Option’,
you will need to click on the option of ‘Restore plan defaults’.
Step
8: After
this, first you will need to click on the ‘Apply’ option and then on the ‘OK’
option.
Please
Note: In the ‘Power Options’, you will need to check whether your laptop has
been running on ‘Power saver mode’ or not because if so, your laptop would not
charge even if it is plugged in.
Step 9: Finally, you need to reboot
your operating system to see the effect.
Once done,
you can reconnect your battery to see if the ‘plugged in but not charging’
issue still exists.
You will
also like to read: How to fix
blue screen error on windows 10
Solution 3: Update your laptop’s
battery drivers
The
‘Microsoft AC Adapter’ and ‘Microsoft ACPI-Compliant Control Method Battery’
sometimes get outdated or incompatible. You are required to update this power
adapter driver to the latest version to see if the laptop battery not charging
issue can be fixed.
But, if
you do not want to waste your time, you can use the ‘Driver Booster’ to update
the newest power management driver for your device. Driver Booster will
download all the missing, outdated drivers at once, and keep updating them
automatically.
Step 1: First you need to download, install
and run the ‘Driver Booster’ software on your laptop.
Step
2: Once
installed, you will need to click on the ‘Scan’ option so that the Driver
Booster can search your laptop for the corrupted or outdated drivers including
the battery driver.
Step 3: After that, you need to find
the ‘Microsoft ACPI-Compliant Control Method Battery’ and click on the ‘Update’
option to update it.
Please
Note: In
most cases, if you follow the above, it might ask you to disconnect and then reinstall
the laptop battery.
Also
check: 5 Best
Chromebooks In India For You To Buy
Solution 4: Reset BIOS of your device.
If the
hardware and driver troubleshooting cannot fix the ‘laptop plugged in not but
charging’ issue in Windows 10, then you will have to make changes to the ‘BIOS’
of your device. By setting the BIOS to default, all the problems related to the
charger or battery of your device will be solved.
Step 1: First, you need to restart
your laptop and sign in again.
Step 2: At the login screen, you need
to press the ‘F2’ key or the ‘Delete’ key to go to the ‘BIOS’ section.
Step
3: Then you
need to click on the ‘Load Setup Defaults’ option and from the pop-up box, you
will need to click on the ‘Yes’ option to begin the ‘Load default
configuration’ for BIOS.
Once you
log in to your device, you can connect the charger and see that the ‘laptop
plugged in but not charging’ issue will no longer persist and the battery icon
at the right bottom will display the charging sign.
Some other check that you can
perform:
Before
referring to any of the solutions mentioned above, there are some basic checks
that you can perform.
- You need to ensure that the AC
outlet and laptop plugs are placed firmly.
- You need to check the AC
adapter brick and ensure all removable cords are inserted properly and in
the right place.
- You need to make sure that you
have properly placed the laptop’s battery in its cell box and ensure that
there is no problem with the battery or the contact points of your laptop.
- You need to make sure that
there are no dust particles inside the charging port of your device.
- You should check if your laptop
is overheating. If yes, then you will have to remove the battery, leave it
out for a few minutes and then put it back in.
Final words
So this
was all about the issue of ‘laptop plugged in but not charging’. By following
either of the mentioned solutions, you might be able to resolve this issue with
your device. We hope this was helpful and informative. Stay tuned to TechSunk for more of
such topics.
Meanwhile,
you can also check: How To
Connect Two Monitors To A Laptop Easily In Windows 10?
Comments
Post a Comment